DJI Avata Pro-View Custom Combo w/ Remote Controller

Regular price $1,587.00 Sale


Availability: Able to Source Unavailable

Product Type: sUAS

Product Vendor: DJI


  • Exchange or Return within 7 days of a delivery
  • 100% quality Guaranteed Plus Fast & Secure Shipping

Discover a Freedom that comes from being airborne with DJI's Avata first person view (FPV) compact drone. This UAV is lightweight and nimble in tight spaces. Built-in propeller guard means that if Avata comes in contact with an object, it can bounce back, stay in the air, and can keep on flying.

This aircraft is designed to be controlled with the DJI Motion Controller. Squeeze the trigger to move forward or turn by moving your wrist.

Enjoy next-level comfort with the DJI Goggles 2. Now with a two-hour battery life and super-fast charging speeds to help you enjoy longer flights. Two HD Micro-OLED screens offer upgraded clarity and a refresh rate of up to 100 Hz. Diopter adjustments ranging from +2.0 D to -8.0 D is available for optimized viewing and comfort.

Should the Avata fall on its back, activate "Turtle mode" with a few simple taps and watch it spring back into action.


  • 4K Stabilized Video
  • Built-in Propeller Guard
  • HD Low-Latency Transmission
  • 1/1.7-inch Sensor
  • 4K/60fps Video
  • 155° Super-Wide FOV
  • Flight Time: 18 min
  • RemoteID Supported


  • DJI Goggles 2
  • DJI FPV Goggles V2
  • DJI Motion Controller
  • DJI FPV Remote Controller 2

The difference between using DJI Avata with DJI Goggles 2 and DJI FPV Goggles V2 is that the DJI Goggles 2 has more features. It supports Head Tracking Mode, Ocusync 3 (O3+) Video Transmission, which enables high-definition, low-latency video transmission. The DJI Goggles 2 is smaller, lighter and has an upgraded display with diopter adjustment.

The Avata does not have forward obstacle sensors. It features downward binocular vision and ToF infrared to help detect obstacles below and allow the drone fly at low-altitude or indoors.

The motion controller's Emergency Brake button lets you stop at the tap of a button. Smart RTH, Low Battery RTH, and Failsafe RTH supported. The drone will Return-to-Home on low battery or if the signal drops out.


  • 1/1.7-inch Sensor
  • 4K/60fps Video
  • 155° Super-Wide FOV
  • Format Equivalent: 12.6 mm
    Focal Length: 2.34 mm
    Aperture: f/2.8
    Focus Mode: FF
    Focus Range: 0.6 m to ∞
    Camera Mode: Normal, Wide, Ultra Wide
    Color Mode: Standard, D-Cinelike
    EIS Support: RockSteady, HorizonSteady
    Video Codec: H.264
    Resolution: 4000 x 3000, 4K
    Video Format: MP4
    Manual Adjustment: ISO, Shutter, EV, WB

    Flight Time: 18 min
    Built-in Storage: 20GB

    Max Transmission Range: 10 km (6.2 miles)
    Satellite Positioning: GPS, Galileo, and BeiDou
    Downward Position Light: No

    With DJI Goggles 2

    With DJI FPV Goggles V2

    DJI Avata, an Intelligent Flight Battery, 3x Propellers (Pair), Power Adapter, Gimbal Protector Type-C to Type-C PD Cable, Screwdriver, 4x Screws (M2×7), DJI Goggles 2, a battery for the DJI Goggles 2 Battery, Eyeglass Frames (Pair), Screen Protector, Headband, DJI Goggles 2 Power Cable, DJI Goggles 2 Dual-Band Antenna, OTG Cable, DJI Motion Controller, DJI FPV Remote Controller 2, and a Lanyard



    DJI FPV Remote Controller 2
    DJI Avata Fly More Kit
    DJI Avata Intelligent Flight Battery
    DJI Avata ND Filters Set (ND8/16/32)

    DJI Avata Propellers Guard
    DJI Avata Propellers
    DJI Avata Upper Frame


    1. Power on the aircraft, goggles, and remote control device. Press and then press and hold the power button to power on or off each device.
    2. Press the link button on the goggles. The goggles will start to beep continually.
    3. Press and hold the power button of the aircraft until it beeps once and the battery level LEDs blink in sequence.
    4. Once linking is successful, the battery level LEDs of the aircraft turn solid and display the battery level, and the goggles stop beeping and show the live view of the aircraft camera.
    5. Press and hold the power button of the aircraft until it beeps once and the battery level LEDs blink in sequence.
    6. Press and hold the power button of the remote control device until it starts to beep continually and the battery level LEDs blink in sequence.
    7. Once linking is successful, the remote controller stops beeping, and both the battery level LEDs turn solid and display the battery level.
    * For details, refer to the user manual or tutorial video.


    Your cart