Total: $0.00
Taxes and shipping calculated at checkout
Vendor: Autel Robotics
Type: Drones
Sku: 102001513
Available: Able To Source
- SUMMARY
- SPECS
- IN THE BOX
- VIDEOS
- ACCESSORIES
SUMMARY
Take better photos with a premiere quality 6K sensor from Autel Robotics. The Autel Robotics EVO II 6K Pro v3 aircraft comes with a variety of bundled options. Select from the Rugged, RTK Rugged or Enterprise bundles. Note that the type of controller you receive will change with the selection. Two types of controllers are available.
This v3 aircraft is similar to the previous v2 model with some new additional enhancements. Longer flight distance, larger camera sensor, optimized onboard intelligence, and RemoteID compliance onboard readiness.
FEATURES
- Touch screen smart controller: v3 or SE model
- 20 megapixel 1-inch CMOS sensor, FOV 82°, 29mm lens
- Supports up to 6K @ 30 fps and up to 5.5K @ 60 fps
- Adjustable Aperture: F2.8~F11
- Max image size: 5472 x 3648
- 16x digital zoom with 3x lossless zoom
- HDR and intuitive camera controls
- Max Flight Time: 38-45 Min
- Max Signal Range: Up to a 9 miles
- Max Fight Speed: Up to 48 mph
- Wind Resistance: Level-7 (39-mph)
- 360° Obstacle Avoidance
- AI/Machine Learning enabled collision avoidance system:
- RemoteID: Onboard, FAA Approved
- Low Noise Propellers
- Max Payload: 2 pounds
- Manufacturer controlled Geo-Zone Restricting, Non-Existent
- Able to integrate with the LiveDeck 2 video streaming system.
- This aircraft is not IP-rated
- Manufacturer warranty: 1 year
VISIBLE CAMERA SENSOR
Capture stunning photographic and video imagery through the paired 20 megapixel 1-inch RYYB CMOS camera sensor. This upgraded camera supports up to 4K HDR video and receives up to 40% more light compared to the previous model. This sensor additionally supports the moonlight 2.0 algorithm which offers noise suppression in low light scenarios. The camera can automatically balance overexposure and underexposure when shooting scenes with too much contrast thanks to the PDAF (Phase Detection Auto Focus) and CDAF (Contrast Detection Auto Focus) enhancements.
SMART CONTROLLER v3 -vs- SMART CONTROLLER SE
Autel also is introducing two different types of Smart Controllers and pairing certain models with different bundles. If you select the 'Rugged' style, an Autel Remote Control SE will come with your order. The SE model is 6.4-inch OLED touch screen with no customizable buttons. The unit will take 2-hours to charge and has a 3-hour runtime at maximum brightness setting. This controller is not compatible with prior v2 or v1 EVO II model aircraft but does have expansion slots to support 4G/5G connectivity in the future.
The other style selections will trigger a Autel Smart Controller v3 to be sent instead. This controller has a 7.9-inch touch screen with two customizable buttons and a 2048x1536 resolution 2000 nit display. This unit will take 2-hours to charge and can run for approx 3-hours at maximum brightness setting. This controller is not compatible with prior v2 or v1 EVO II model aircraft but does have expansion slots to support 4G/5G connectivity in the future.
COMPATIBILITY
This v3 aircraft is backwards compatible with the following EVO II v2 accessories:
Intelligent Flight Batteries | Propellers | Car charger | Multi-charging hub | Gimbal guards | Foxfury related products: 7-pt harness, D3060 & D10 light kits and the Exolander.
Both v1 and v2 smart controllers are not compatible with the v3 model. Camera gimbals can no longer be hot-swapped. v1 and v2 are compatible with each other. v3 is not.
SPECS
| EVO II 6K Pro V3 Specifications | |
| Aircraft | |
| Takeoff weight | 1191 g |
| Max takeoff weight | 2000 g |
| Wheelbase | 397 mm |
| Size(L*W*H) |
230*130*108mm（folded） 457*558*108mm（unfolded） |
| Maximum service ceiling altitude | 7000 m |
| Max ascent speed | 8 m/s (Ludicrous) |
| Max descent speed | 4 m/s (Ludicrous) |
| Max horizontal flight speed | 20m/s (Ludicrous) |
| Max flight distance (no wind) | 25 km |
| Max tilt angle | 33° (Ludicrous) |
| Max angular velocity | 120°/s |
| Max flight time (no wind) | 40 min |
| Max hovering time (no wind) | 35 min |
| Operating temperature range | -10℃ ~ 40℃ |
| Maximum resistance to wind | Level 8 |
| Operating frequency | 902-928MHz (FCC Only) 2.400-2.4835GHz 5.725-5.850GHz (non-Japan) 5.650-5.755GHz (Japan Only) |
| Transmission power |
900M FCC/ ISED：≤31dBm 2.4G FCC/ ISED：≤32dBm SRRC/CE/MIC/RCM：≤20dBm 5.8G (non-Japan) ; 5.7G (Japan) FCC/ISED/SRRC/MIC：≤33dBm CE/ RCM：≤14dBm |
| Hovering accuracy | Vertical: ±0.1 m (when the visual positioning is working normally); ±0.5 m (when GPS works normally) Horizontal: ±0.3 m (when the visual positioning is working normally); ±1.5 m (when GPS works normally) |
| GNSS | GPS/Beidou/Glonass/Gallieo |
| Internal storage | 8GB |
| SD storage | max. support 256GB (UHS-3 or Class 10) |
| Gimbal | |
| Gimbal | 3-axis stabilization |
| Mechanical range | Tilt: -135° to +45°; Pan: -100° to +100° |
| Controllable rotation range | Tilt: -90° to +30°; Pan: -90° to +90° |
| Max control speed (Tilt) | 300°/s |
| Angular Vibration Range | ±0.005° |
| Remote controller and image transmission | |
| Operating frequency | 902-928MHz (FCC Only) 2.400-2.4835GHz 5.725-5.850GHz (non-Japan) 5.650-5.755GHz (Japan Only) |
| Transmission power |
FCC：≤33dBm CE：≤20dBm@2.4G，≤14dBm@5.8G SRRC：≤20dBm@2.4G，≤33dBm@5.8G/5.7G |
| Max Transmission Distance (unobstructed, free of interference) |
FCC：15km CE：8km |
| Display screen | 2340x1080 60fps |
| Battery | 1900mAh |
| Operating time | ~2 hours (Max. Brightness) ~4 hours (50% Brightness) |
| Charging time | 90 minutes |
| Internal Storage | ROM 128GB + expandable storage via micro-SD card |
| Sensing system | |
| Sensing system type | Omnidirectional sensing system |
| Forward | Accurate measurement range: 0.5-18 m Effective sensing speed: <12m/s Viewing angle: Horizontal: 60°, Vertical: 80° |
| Backward | Accurate measurement range: 0.5-16 m Effective sensing speed: <12m/s Viewing angle: Horizontal: 60°, Vertical: 80° |
| Upward | Accurate measurement range: 0.5-10 m Effective sensing speed: <5m/s Viewing angle: Horizontal: 65°, Vertical: 50° |
| Downward | Accurate measurement range: 0.5-10 m Effective sensing speed: <5m/s Viewing angle: horizontal: 100°, vertical: 80° |
| Left and right | Accurate measurement range: 0.5-10 m Effective sensing speed: <5m/s Viewing angle: horizontal: 65°, vertical: 50° |
| Operating Environment | Forward, Backward and Sides: Surface with clear pattern and adequate lighting (lux > 15) Upward: Detects diffuse reflective surfaces (>20%) (walls, trees, people, etc.) Downward: Surface with clear pattern and adequate lighting (lux > 15) Detects diffuse reflective surfaces (>20%) (walls, trees, people, etc.) |
| Camera | |
| Sensor | 1 inch CMOS; 20M pixels |
| Lens | FOV: 82° 35 mm format equivalent focal length: 29 mm Aperture: f/2.8 - f/11 Focus range: 0.5 m to infinity |
| ISO range | Video: 100-44000 Photos: 100-6400 |
| Shutter speed | Photo mode: 1/8000 ~ 8s Other: 1/8000 ~ 1/frame rates |
| Zoom | 1-16x (up to 3x lossless zoom) |
| Photo mode | Single shot/Burst shooting/AEB/Time Lapse/HDR |
| Maximum photo size | 5472*3648 (3:2) 5472*3076 (16:9) 3840*2160 (16:9) |
| Image Format | JPG (default) / DNG / JPG+DNG |
| Photo mode | 5472x3076P30/P25/P24 3840x2160P60/P50/P48/P30/P25/P24 2720x1528P60/P50/P48/P30/P25/P24 1920x1080P60/P50/P48/P30/P25/P24 |
| Video format | MP4 / MOV (MPEG-4 AVC/H.264, HEVC/H.265) |
| Max bitrate | 120Mbps |
| Supported file system | FAT32/exFAT |
| Battery | |
| Capacity | 7100 mAh |
| Voltage | 11.55 V |
| Battery type | LiPo 3S |
| Energy | 82 Wh |
| Weight | 365 g |
| Charging temperature range | 5℃ to 45℃ |
| Storage temperature and humidity | -10~30℃，65±20%RH |
| Recommended storage temperature | 22-28℃ |
| Max charging power | 93W |
| Charging time | 90 minutes |
| Charger | |
| Input | 100-240 V, 50/60 Hz, 1.5A |
| Output |
13.2 V ⎓ 5 A 5V⎓3A 9V⎓2A 12V⎓1.5A |
| Voltage | 13.2±0.1V |
| Rated power | 66W |
| Multi-Charger | |
| Voltage | 13.2 V |
| Charging temperature range |
5℃ to 45℃ |
IN THE BOX
ATTENTION: Autel Robotics is introducing two different types of Smart Controllers and is pairing certain models with different bundle combinations. For this product, the 'Style' selection dictates the controller choice. Choosing the 'Rugged' style will yield a Smart Controller SE. Choosing either of the remaining two types will result in a Smart Controller v3.
The EVO II Pro Rugged Bundle includes : EVO II v3 6k Aircraft x1, gimbal cover x1, v3 6.4" Smart Controller SE x1, pairs of propellers x3, Smart controller USB-C Charging Cable & Power Brick x1, 110v Battery Charger (Wall cord and Power Converter) x1, Batteries x2, Pair of Spare controller sticks x 1, 32 GB SD card x1, Smart controller Hanging Neck Strap x1, Rugged Hard Case x1.
The EVO II Pro Enterprise Bundle includes: EVO II v3 6k Aircraft x1, gimbal cover x1, v3 7.9" Smart Controller x1, Controller case x1, Batteries x3, smart controller USB-C Charging Cable & Power brick x1, 110v Battery Charger (wall cord and power converter) x1, 12v DC Car Charger x1, Controller neck Strap x1, Attachment Port Cover x1, Pairs of Propellers x4, Multi-Charging Hub x1, Rugged Hard Case x1, pair spare controller sticks x1, 32GB SD card x1. Top Mount Accessories: Speaker, Search Light, Strobe. RTK module sold separately.
Manuals come with each of the above bundles to include: Packing list, Quick Guide, Disclaimer & Safety Instructions, Battery Safety
VIDEOS
None available at this time
ACCESSORIES
- Intelligent Flight Battery
- Multi-Charging Hub
- Propellers
- Propeller Guards
- AC Power and Charger
- DC Car Charger
- v3 Smart Controllers
- LiveDeck 2
- RTK module (for Enterprise models only)
- ND Filters for 6K Gimbal
- Gimbal Guards 6k
-
FoxFury Saddle (Mount Only)
- FoxFury Saddle Mount w/ Lights
- FoxFury Exolander and D100 SpotLight
GIMBALS (Camera Only)
EVO II 640T Gimbal v3
STORAGE
Don't see what you are looking for? Give us a call: 856-281-7545
Related product
